After many friends bought a computer chair, they sent a bunch of separate parts. At this time, they were dumbfounded and could not install it. There are also some friends who want to move and want to disassemble the computer chair, but they don't know how to disassemble it. In fact, whether it is the installation of the computer chair or the disassembly and assembly of the computer chair is very simple, here is a detailed introduction for you.
Computer Chair Installation :
1. First of all, put all the parts separately--separately, put them in a good position, and don't mess up.
2. Then remove the screws on the back of the computer chair, and then install the tray
3. Then install the wheel on the fifth wheel, and it is very simple.
4. Then put the pressure rod on, and then fasten the computer chair tray and it is basically completed.
5. After the basic completion, the air rod can be adjusted up and down.
The design of the lifting rod for the disassembly and assembly of the computer chair is inverted conical, that is, it is directly inserted during installation, without screws, welding, and other means. So when dismantling, directly raise the air rod to the highest (convenient to start), use a hammer to knock the chassis around the lift rod, and it will automatically fall off (don't keep knocking one point, the chassis of poor quality is easy to be knocked out, can be tapped in circles). As long as you firmly believe that it will come down, you can just knock it directly. The longer the chair is, the tighter it will be, and the harder it will be to knock.
Computer chairs are indeed more comfortable and convenient to sit on and are very popular with everyone. After reading this article to teach you the installation method, you can buy it online, but you must follow the steps.
